Originally posted by swhfd28: Where can I find the measurements to put my e4 decives on. I lost the sheet that had them on there. Cant rem if it 1" in...etc?
Alos is there a uniform reg. on line that shows everything...uniform, etc
Here is from the current Uniform RegsMan:
"Operational Dress and Working Blue Shirt Collar rank insignia is centered on the collar, along an imaginary line bisecting the angle of the collar point."
This is from ALCOAST 223/07. COLLAR RANK AND SPECIALTY INSIGNIA CAN BE METAL (STANDARD UNTIL 15 JULY 2007) OR EMBROIDERED (CURRENTLY OPTIONAL, BECOMING STANDARD AFTER 15 JULY 2007). NO MIXING OF STYLES IS AUTHORIZED. INSIGNIA SHALL NOT BE SCRATCHED, BENT, TORN OR DISFIGURED IN ANY WAY. ALL COLLAR RANK INSIGNIAS, WITH EXCEPTION OF EMBROIDERED O3 AND O6, SHALL BE PLACED ON THE IMAGINARY LINE BISECTING THE ANGLE OF THE COLLAR WITH THE BASE OF THE INSIGNIA (NOT THE EMBROIDERED PATCH) APPROX 1 1/8 INCH FROM COLLAR POINT. DUE TO THEIR HORIZONTAL FORMAT, EMBROIDERED O3 AND O6 RANK INSIGNIA SHALL BE PLACED 1 1/2 INCHES FROM THE POINT.
Originally posted by ryans74: This is from ALCOAST 223/07. COLLAR RANK AND SPECIALTY INSIGNIA CAN BE METAL (STANDARD UNTIL 15 JULY 2007) OR EMBROIDERED (CURRENTLY OPTIONAL, BECOMING STANDARD AFTER 15 JULY 2007). NO MIXING OF STYLES IS AUTHORIZED.
Close but old data. Metal devices are not authorized (ALCOAST 427/07).
